Re: [coldsync-hackers] Visor Platinum

[Andrew Arensburger <arensb+CSHackers@ooblick.com>]

On Mon, Mar 12, 2001 at 05:00:18PM +0900, Akira Funahashi wrote:
> I've edited my ~/.coldsyncrc just as you described,
> and executed the coldsync as shown below:
> 
>   % coldsync -mI
>   Please press the HotSync button.
> 
> Then, I've hit the HotSync button on the cradle,
> and my FreeBSD box (4.2-RELEASE) said that
> my Visor Platinum is connected to /dev/ugen0.
> 
>   </var/log/messages>
>   ugen0: Handspring Inc Handspring Visor, rev 1.00/1.00, addr 3
>   ugen0: at uhub0 port 1 (addr 3) disconnected
> 
> But after few seconds, coldsync will fail, and it will show
> a message as shown below.
> 
> usb read: Input/output error

	It's possible that you also need to be able to read and write
/dev/ugen0.2 (or perhaps one of the other /dev/ugen0.* devices). If
so, then this needs to be documented.
	If you could play around with this and let me know what you
find, I would appreciate it.

-- 
Andrew Arensburger                      This message *does* represent the
arensb@ooblick.com                      views of ooblick.com
For best results, squeeze messsage from the bottom and flatten as you go up.

-- 
This message was sent through the coldsync-hackers mailing list.  To remove
yourself from this mailing list, send a message to majordomo@thedotin.net
with the words "unsubscribe coldsync-hackers" in the message body.  For more
information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.