Re: [coldsync-hackers] Clie S300 times out before sync

[Russ Bryant <russbryant at bellsouth dot net>]

Debian flavor is Potato
I upgraded to 2.4.18 and the machine now knows I have a PDA!
It does not seem to be backing up however.

coldsync -mI produces:
rdb@debian:~$ coldsync -mI
Warning: no device on /dev/ttyUSB0. Sleeping
Please press the HotSync button.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
Error: Can't get system info.
Error: Can't read length of serial number.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
ACK Timeout. Attempting to resend.
Error: Error during DlpEndOfSync: (3) Timeout.

Thanks for the tip on the kernel.  Any idea what should be my next step?

On Sun, 2002-06-30 at 14:40, David wrote:
> On 29 Jun 2002, Russ Bryant wrote:
> 
> > I have looked for the various .coldsyncrc configurations listed in the
> > archive, and tried to try them all, but still no sync.
> >
> >
> > /var/log/messages contains:
> >
> > Jun 28 23:46:15 debian kernel: hub.c: USB new device connect on bus1/2,
> > assigned device number 16
> > Jun 28 23:46:15 debian kernel: usbserial.c: Sony Clié 3.5 converter
> > detected
> > Jun 28 23:46:15 debian kernel: usbserial.c: Sony Clié 3.5 converter now
> > attached to ttyUSB0 (or usb/tts/0 for devfs)
> > Jun 28 23:46:35 debian kernel: usb-uhci.c: interrupt, status 3, frame#
> > 1725
> > Jun 28 23:46:35 debian kernel: usb.c: USB disconnect on device 16
> > Jun 28 23:46:35 debian kernel: usbserial.c: Sony Clié 3.5 converter now
> > disconnected from ttyUSB0
> >
> > .coldsyncrc:
> > listen serial {
> > 	protocol: simple;
> > 	device: /dev/ttyUSB0;
> > 	speed: 115200;
> > }
> >
> > pda "Clie" {
> > 	directory: /home/rdb/MyPilot;
> > 	default;
> > }
> >
> > though is has had protocol: net, id tags, etc.
> >
> > I have tried the ~.4 in memo (on the Clie), but I get no info (I might
> > be missing a step.
> > I have synced with Win2K on the same dual boot machine and a Win98
> > machine at work.
> >
> > Debian 2.4.17
> > coldsync 2.2.5
> >
> > Any idea what I am doing wrong?
> >
> 
> What kernel version are you using.  I had trouble with the clie drivers
> from 2.4.17, the ones in 2.4.18 are good.
> 
> -- 
> David
> dsfranks at erwin dot largegeek dot com
> ICQ#: 118347772
> 
> 
>              (  )            (  )
>           ( / \/ \          / \/ \ )
>        ( / \\_/\_/ )      ( \_/\_// \ )
>       / \\_/----- / \    / \ -----\_// \
>       \_/--'     \_ /    \ _/     `--\_/
>        \           /      \           /
>         `-----.___/        \___.-----'
> 
> 
> 
> -- 
> This message was sent through the coldsync-hackers mailing list.  To remove
> yourself from this mailing list, send a message to majordomo@thedotin.net
> with the words "unsubscribe coldsync-hackers" in the message body.  For more
> information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.
ORIGINAL MESSAGE:

I have looked for the various .coldsyncrc configurations listed in the
archive, and tried to try them all, but still no sync.


/var/log/messages contains:

Jun 28 23:46:15 debian kernel: hub.c: USB new device connect on bus1/2,
assigned device number 16
Jun 28 23:46:15 debian kernel: usbserial.c: Sony Clié 3.5 converter
detected
Jun 28 23:46:15 debian kernel: usbserial.c: Sony Clié 3.5 converter now
attached to ttyUSB0 (or usb/tts/0 for devfs)
Jun 28 23:46:35 debian kernel: usb-uhci.c: interrupt, status 3, frame#
1725
Jun 28 23:46:35 debian kernel: usb.c: USB disconnect on device 16
Jun 28 23:46:35 debian kernel: usbserial.c: Sony Clié 3.5 converter now
disconnected from ttyUSB0

.coldsyncrc:
listen serial {
        protocol: simple;
        device: /dev/ttyUSB0;
        speed: 115200;
}

pda "Clie" {
        directory: /home/rdb/MyPilot;
        default;
}

though is has had protocol: net, id tags, etc.

I have tried the ~.4 in memo (on the Clie), but I get no info (I might
be missing a step.
I have synced with Win2K on the same dual boot machine and a Win98
machine at work.

Debian 2.4.17
coldsync 2.2.5

Any idea what I am doing wrong?


-- 
This message was sent through the coldsync-hackers mailing list.  To remove
yourself from this mailing list, send a message to majordomo@thedotin.net
with the words "unsubscribe coldsync-hackers" in the message body.  For more
information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.