[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [coldsync-hackers] Clie S300 times out before sync
- To: <coldsync-hackers at lusars dot net>
- Subject: Re: [coldsync-hackers] Clie S300 times out before sync
- From: David <dsfranks at erwin dot largegeek.com>
- Date: Sun, 30 Jun 2002 13:40:19 -0500 (CDT)
- cc: <coldsync-hackers at thedotin dot net>
- In-Reply-To: <1025323317.416.11.camel@debian>
- Reply-To: coldsync-hackers at lusars dot net
- Sender: owner-coldsync-hackers at lusars dot net
On 29 Jun 2002, Russ Bryant wrote:
> I have looked for the various .coldsyncrc configurations listed in the
> archive, and tried to try them all, but still no sync.
>
>
> /var/log/messages contains:
>
> Jun 28 23:46:15 debian kernel: hub.c: USB new device connect on bus1/2,
> assigned device number 16
> Jun 28 23:46:15 debian kernel: usbserial.c: Sony Clié 3.5 converter
> detected
> Jun 28 23:46:15 debian kernel: usbserial.c: Sony Clié 3.5 converter now
> attached to ttyUSB0 (or usb/tts/0 for devfs)
> Jun 28 23:46:35 debian kernel: usb-uhci.c: interrupt, status 3, frame#
> 1725
> Jun 28 23:46:35 debian kernel: usb.c: USB disconnect on device 16
> Jun 28 23:46:35 debian kernel: usbserial.c: Sony Clié 3.5 converter now
> disconnected from ttyUSB0
>
> .coldsyncrc:
> listen serial {
> protocol: simple;
> device: /dev/ttyUSB0;
> speed: 115200;
> }
>
> pda "Clie" {
> directory: /home/rdb/MyPilot;
> default;
> }
>
> though is has had protocol: net, id tags, etc.
>
> I have tried the ~.4 in memo (on the Clie), but I get no info (I might
> be missing a step.
> I have synced with Win2K on the same dual boot machine and a Win98
> machine at work.
>
> Debian 2.4.17
> coldsync 2.2.5
>
> Any idea what I am doing wrong?
>
What kernel version are you using. I had trouble with the clie drivers
from 2.4.17, the ones in 2.4.18 are good.
--
David
dsfranks at erwin dot largegeek dot com
ICQ#: 118347772
( ) ( )
( / \/ \ / \/ \ )
( / \\_/\_/ ) ( \_/\_// \ )
/ \\_/----- / \ / \ -----\_// \
\_/--' \_ / \ _/ `--\_/
\ / \ /
`-----.___/ \___.-----'
--
This message was sent through the coldsync-hackers mailing list. To remove
yourself from this mailing list, send a message to majordomo@thedotin.net
with the words "unsubscribe coldsync-hackers" in the message body. For more
information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.