[coldsync-hackers] m500 + usb + freebsd

[Jedrzej Nasiadek <jnasiade@ia.pw.edu.pl>]

Hi!

I've read some archives from this list about m50x and found that it possibly
can work under FreeBSD, so i gave it a try:

I fetched snapshot coldsync-2.2.2-20011012 and compiled it with --with-usb
The cmdline I ran was:
   $ coldsync -mI -p /dev/ugen0 -P net -t usb -v -dsync:5 -dmisc:5 -dio:5
And.. usbd correctly recognizes my palm, coldsync also recognizes the device
but after the messages 'Hotsync endpoint name: "/dev/ugen0.2"' it waits
till hotsync app on palm timeouts, then exits.
The above cmdline generates such log (to save space I quote only lines after
openning the usb port):

Opening device [/dev/ugen0]
/dev/ugen0: Device not configured
/dev/ugen0: Device not configured
/dev/ugen0: Device not configured
Device information: /dev/ugen0 vendor 0830 (Palm, Inc.) product 0001 (Palm Handheld) rev 1.00 addr 2
ConnectionInfo: entry 0 function Generic on port 1
ConnectionInfo: entry 1 function Hotsync on port 2
first setup 0x1 returns 2 bytes:  0x01 0x00
Hotsync endpoint name: "/dev/ugen0.2"
usb read: Input/output error
slp_read: read: Input/output error
Error during cmp_read: (1) Error in system call or library function.
Error: Can't connect to Palm.
Calling io_drain()
Freeing sync_config 0x8092070
ColdSync terminating normally

Any ideas what can be wrong?

(I've tried also with protocol m50x but also without success)

best regards,
    Jedrzej
This message was sent through the coldsync-hackers mailing list.  To remove
yourself from this mailing list, send a message to majordomo@thedotin.net
with the words "unsubscribe coldsync-hackers" in the message body.  For more
information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.