[coldsync-hackers] FreeBSD + Visor help

[Andres Rodriguez <andresr at proton dot ucting.udg.mx>]

 Hello,

 Recently I got my first PDA [A Handspring Visor Deluxe with USB cradle]
and I'm trying to make sync in a FreeBSD 4.5-RELEASE with generic kernel
using

coldsync version 2.2.5.
ColdSync homepage at http://www.ooblick.com/software/coldsync/
Compile-type options:
    WITH_USB: USB support.
    HAVE_STRCASECMP, HAVE_STRNCASECMP: strings are compared without regard
        to case, whenever possible.

    Default global configuration file: /usr/local/etc/coldsync.conf

 I've read the messages  from the archive and the README and README.daemon
from the package and put the following on my /etc/usbd.conf

device "Handspring Visor"
        vendor 0x082d
        product 0x0100
        release 0x0100
        attach "/usr/local/bin/coldsync -md -t usb -s ${DEVNAME}"

I make a test with

proton# usbd -d -vvv
usbd: opened /dev/usb0
usbd: reading configuration file /etc/usbd.conf
usbd: action 1: ActiveWire board, firmware download
  vndr=0x0854 prdct=0x0100 rlse=0x0000
  attach='/usr/local/bin/ezdownload -f
/usr/local/share/usb/firmware/0854.0100.0_01.hex ${DEVNAME}'
usbd: action 2: Entrega Serial with UART
  vndr=0x1645 prdct=0x8001 rlse=0x0101
  attach='/usr/sbin/ezdownload -v -f
/usr/share/usb/firmware/1645.8001.0101 /dev/${DEVNAME}'
usbd: action 3: Handspring Visor
  vndr=0x082d prdct=0x0100 rlse=0x0100
  attach='/usr/local/bin/coldsync -md -t usb -s ${DEVNAME}'
usbd: action 4: USB ethernet
  devname: [ack]ue[0-9]+
  attach='dhclient ${DEVNAME}'
  detach='killall dhclient'
usbd: action 5: Mouse
  devname: ums[0-9]+
  attach='/usr/sbin/moused -p /dev/${DEVNAME} -I
/var/run/moused.${DEVNAME}.pid'
usbd: action 6: USB device
usbd: 6 actions
usbd: opened /dev/usb
usbd: doing timeout discovery on /dev/usb0
usbd: processing event queue due to timeout on /dev/usb
usbd: doing timeout discovery on /dev/usb0
usbd: processing event queue due to timeout on /dev/usb


And those last 2 lines are repeated again and again. I only get a hotsync
problem message on the PDA. Any help on what should I check ? What else
can I do ?  I've never used any USB device on FreeBSD but it seems that
there is support for them on the kernel.

[From dmesg]

ohci0: <SiS 5571 USB controller> mem 0xf3ffe000-0xf3ffefff irq 10 at
device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xf3fff000-0xf3ffffff irq 10 at
device 1.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered

If I run coldsync directly this is all I get:

proton# /usr/local/bin/coldsync -mI
Please press the HotSync button.
pconn_usb_open: Can't open USB device.
open: Bad file descriptor
Error: Can't open connection.



proton# /usr/local/bin/coldsync -t usb -p /dev/ugen0 -mI
Please press the HotSync button.
pconn_usb_open: Can't open USB device.
open: Bad file descriptor
Error: Can't open connection.



-- 
This message was sent through the coldsync-hackers mailing list.  To remove
yourself from this mailing list, send a message to majordomo@thedotin.net
with the words "unsubscribe coldsync-hackers" in the message body.  For more
information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.