[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[coldsync-hackers] *still* having trouble syncing with clie 760

Hi folks am still having trouble syncing with my 760, think the problem 
lies with the usb protocol itself as metioned earlier?

Got this when i press the sync button.

Please press the HotSync button.
##### Bad response ID: expected 0x92, got 0x93.
Error: Can't get system info.
Error: Can't read length of serial number.
##### Bad response ID: expected 0xaf, got 0x92.
Error: Error during DlpEndOfSync: (7) Invalid request ID.
usb.c: USB disconnect on device 7
usbserial.c: Sony Clie 4.0 converter now disconnected from ttyUSB0
usbserial.c: Sony Clie 4.0 converter now disconnected from ttyUSB1

and came along with some debug stuffz attached, which i don't really 
understand :)

Hope someone out there will be able to help?


hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned device number 7
usb.c: kmalloc IF c2320860, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 7 default language ID 0x409
Manufacturer: Sony Corp.
Product: Palm Handheld
usbserial.c: descriptor matches
usbserial.c: found bulk in
usbserial.c: found bulk out
usbserial.c: Sony Cli<E9> 4.0 converter detected
usbserial.c: get_free_serial 2
usbserial.c: get_free_serial - minor base = 0
visor.c: visor_startup
visor.c: visor_startup - Set config to 1
visor.c: Sony Cli<E9> 4.0: Number of ports: 2
visor.c: Sony Cli<E9> 4.0: port 1, is for Generic use and is bound to 
ttyUSB0
visor.c: Sony Cli<E9> 4.0: port 2, is for HotSync use and is bound to 
ttyUSB1
visor.c: visor_startup - error getting first unknown palm command
visor.c: visor_startup - error getting second unknown palm command
usbserial.c: usb_serial_probe - setting up 2 port structures for this 
device
usbserial.c: Sony Cli<E9> 4.0 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
usbserial.c: Sony Cli<E9> 4.0 converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
usb.c: serial driver claimed interface c2320860
usb.c: kusbd: /sbin/hotplug add 7
usbserial.c: serial_open
visor.c: visor_open - port 0
usbserial.c: serial_ioctl - port 0, cmd 0x5401
visor.c: visor_ioctl - port 0, cmd 0x5401
usbserial.c: serial_ioctl - port 0, cmd 0x5402
visor.c: visor_ioctl - port 0, cmd 0x5402
usbserial.c: serial_set_termios - port 0
visor.c: visor_set_termios - port 0
visor.c: visor_set_termios - data bits = 8
visor.c: visor_set_termios - parity = none
visor.c: visor_set_termios - stop bits = 1
visor.c: visor_set_termios - RTS/CTS is disabled
visor.c: visor_set_termios - XON/XOFF is disabled
visor.c: visor_set_termios - baud rate = 230400
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 6, data = 01 ff 00 00 00 16
usbserial.c: serial_ioctl - port 0, cmd 0x5401
visor.c: visor_ioctl - port 0, cmd 0x5401
usbserial.c: serial_ioctl - port 0, cmd 0x5401
visor.c: visor_ioctl - port 0, cmd 0x5401
usbserial.c: serial_ioctl - port 0, cmd 0x5402
visor.c: visor_ioctl - port 0, cmd 0x5402
usbserial.c: serial_set_termios - port 0
visor.c: visor_set_termios - port 0
visor.c: visor_set_termios - data bits = 8
visor.c: visor_set_termios - parity = none
visor.c: visor_set_termios - stop bits = 1
visor.c: visor_set_termios - RTS/CTS is disabled
visor.c: visor_set_termios - XON/XOFF is disabled
visor.c: visor_set_termios - baud rate = 9600
usbserial.c: serial_ioctl - port 0, cmd 0x5401
visor.c: visor_ioctl - port 0, cmd 0x5401
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 22, data = 90 01 00 00 00 00 
00 00 00 20 00 00 00 08 00 00 01 00 00 00 00 00
usbserial.c: serial_write - port 0, 6 byte(s)
visor.c: visor_write - port 0
visor.c: visor_write - length = 6, data = 01 01 00 00 00 32
visor.c: visor_write_bulk_callback - port 0
usbserial.c: port_softint - port 0
usbserial.c: serial_write - port 0, 50 byte(s)
visor.c: visor_write - port 0
visor.c: visor_write - length = 50, data = 12 01 00 00 00 00 00 00 00 20 
00 00 00 24 ff ff ff ff 3c 00 3c 00 00 00 00 00 00 00 00 00 c0 a8 a5 1f 04 
27 00 00 00 00 00 00 00 00 00 00 00 00 00 00
visor.c: visor_write_bulk_callback - port 0
usbserial.c: port_softint - port 0
usbserial.c: serial_write - port 0, 6 byte(s)
visor.c: visor_write - port 0
visor.c: visor_write - length = 6, data = 01 02 00 00 00 2e
visor.c: visor_write_bulk_callback - port 0
usbserial.c: port_softint - port 0
usbserial.c: serial_write - port 0, 46 byte(s)
visor.c: visor_write - port 0
visor.c: visor_write - length = 46, data = 13 01 00 00 00 00 00 00 00 20 
00 00 00 20 ff ff ff ff 00 3c 00 3c 00 00 00 00 00 00 00 01 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00
visor.c: visor_write_bulk_callback - port 0
usbserial.c: port_softint - port 0
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 6, data = 01 01 00 00 00 32
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 50, data = 92 01 00 00 00 00 
00 00 00 20 00 00 00 24 ff ff ff ff 00 3c 00 3c 40 00 00 00 01 00 00 00 00 
00 04 00 00 00 04 00 00 3c 00 3c 00 00 00 00 00 00 00 00
usbserial.c: serial_write - port 0, 6 byte(s)
visor.c: visor_write - port 0
visor.c: visor_write - length = 6, data = 01 03 00 00 00 02
visor.c: visor_write_bulk_callback - port 0
usbserial.c: port_softint - port 0
usbserial.c: serial_write - port 0, 2 byte(s)
visor.c: visor_write - port 0
visor.c: visor_write - length = 2, data = 12 00
visor.c: visor_write_bulk_callback - port 0
usbserial.c: port_softint - port 0
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 6, data = 01 02 00 00 00 08
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 8, data = 93 00 00 00 00 00 00 00
usbserial.c: serial_write - port 0, 6 byte(s)
visor.c: visor_write - port 0
visor.c: visor_write - length = 6, data = 01 04 00 00 00 06
visor.c: visor_write_bulk_callback - port 0
usbserial.c: port_softint - port 0
usbserial.c: serial_write - port 0, 6 byte(s)
visor.c: visor_write - port 0
visor.c: visor_write - length = 6, data = 2f 01 20 02 00 02
visor.c: visor_write_bulk_callback - port 0
usbserial.c: port_softint - port 0
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 6, data = 01 03 00 00 00 22
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 34, data = 92 02 00 00 20 0e 
04 10 30 00 00 01 00 00 00 04 00 03 00 00 21 0c 00 01 00 02 00 03 00 00 00 
00 ff e1
visor.c: visor_chars_in_buffer - port 0
visor.c: visor_chars_in_buffer - returns 0
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 6, data = 01 04 00 00 00 04
usbserial.c: serial_close - port 0
visor.c: visor_close - port 0
visor.c: visor_read_bulk_callback - port 0
visor.c: visor_read_bulk_callback - length = 4, data = af 00 00 00
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 7
visor.c: visor_shutdown
usbserial.c: Sony Cli<E9> 4.0 converter now disconnected from ttyUSB0
usbserial.c: Sony Cli<E9> 4.0 converter now disconnected from ttyUSB1
usbserial.c: return_serial
usb.c: kusbd: /sbin/hotplug remove 7
hub.c: port 2 enable change, status 100