Re: [coldsync-hackers] m505 - identifying user -> stall

[Andrew Arensburger <arensb+CShackers@ooblick.com>]

On Sat, Dec 08, 2001 at 08:25:00PM +0100, Thomas Bader wrote:
> I just bought a Palm m505 with an USB craddle.  I also got a
> fresh source copy of coldsync 2.1.3 and applied this patch:
> 
> http://www.thedotin.net/maillists/coldsync-hackers/msg00411.html
> 
> It's a patch by Koen Deforche to sync with the m50x series.

	This is now part of the newly-released version 2.2.5. I
suggest you try building that. The main change is that instead of
"listen usb_m50x", you'll need to use

	listen serial {
		protocol: simple;
		device: /dev/ttyUSB1;	# Or whatever
		transient;		# If /dev uses devfs
	}

> Now I press the HotSync button on my craddle and the visor.o
> kernel module (I'm using Linux 2.4.14) recognizes my Palm.
> Now I run:
> 
>    coldsync -t usb_m50x -p /dev/usb/tts/1 -mI
> 
> After running that, I read "identifying user" on the display
> of my Palm.  But it doesn't goes any further, it stalls here
> until I cancel it.

	Off the top of my head, I'm not sure what's going on. Try
building and running version 2.2.5. If that doesn't work, make sure
your USB drivers and whatnot are all up to date. If that still doesn't
work, try running ColdSync with "-dmisc:5 -dsync:5 -dio:5"; that might
give some useful information.

-- 
Andrew Arensburger                      This message *does* represent the
arensb@ooblick.com                      views of ooblick.com
"General protection fault" is a registered trademark of Microsoft Corp.
All rights reserved.
This message was sent through the coldsync-hackers mailing list.  To remove
yourself from this mailing list, send a message to majordomo@thedotin.net
with the words "unsubscribe coldsync-hackers" in the message body.  For more
information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.