Re: [coldsync-hackers] ACK timeout

[Scott Otterson <scotto@u.washington.edu>]

Thanks, I'll give that a try.

Scott

Brian Holdsworth wrote:
> 
> Scott,
> 
> I had this problem with Coldsync v1.6.7.  It was solved by adding the line:
> 
> speed: 57600
> 
> to my "listen" block in my .coldsyncrc file.  Prior to that, I had no speed
> specified.  So, Coldsync should use the speed that the Palm wants.  However,
> this does not work at all with my m105 Palm Pilot and I get the ACK timeouts
> too.
> 
> If I specify 'speed: 57600' or 'speed: 38400', then it syncs fine.
> 
> Regards,
> Brian
> 
> > -----Original Message-----
> > From: owner-coldsync-hackers@wallace.lusars.net
> > [mailto:owner-coldsync-hackers@wallace.lusars.net]On Behalf Of Scott
> > Otterson
> > Sent: Saturday, March 24, 2001 12:40 PM
> > To: coldsync-hackers@lusars.net
> > Subject: [coldsync-hackers] ACK timeout
> >
> >
> > I'm unable to synch my Palm IIIx on either coldsynch 1.5.5 or 2.0.1.
> > When I type:
> >
> >        coldsync -p /dev/pilot -mb tmp.coldsync/
> >
> > and push the Palm's synch button, coldsync prints a long stream of:
> >
> >       ACK Timeout. Attempting to resend.
> >
> > and then the error message:
> >
> >       Error: Error during DlpEndOfSync: (3) Timeout.
> >       Error: Couldn't disconnect.
> >
> > My hardware's OK because the palm synch works fine in MS windows.  It
> > also almost works in pilot-synch (although I get "weird packet"
> > messages) and I believe it worked in one of the earlier versions of
> > coldsync as well.
> >
> > --
> > This message was sent through the coldsync-hackers mailing list.
> > To remove
> > yourself from this mailing list, send a message to majordomo@thedotin.net
> > with the words "unsubscribe coldsync-hackers" in the message
> > body.  For more
> > information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.
> >
> 
> --
> This message was sent through the coldsync-hackers mailing list.  To remove
> yourself from this mailing list, send a message to majordomo@thedotin.net
> with the words "unsubscribe coldsync-hackers" in the message body.  For more
> information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.

-- 
This message was sent through the coldsync-hackers mailing list.  To remove
yourself from this mailing list, send a message to majordomo@thedotin.net
with the words "unsubscribe coldsync-hackers" in the message body.  For more
information on Coldsync, send mail to coldsync-hackers-owner@thedotin.net.